水泵采购网

进口大流量齿轮泵哪家品牌好

进口大流量齿轮泵Product description:

Application: It is suitable for conveying without solid particles and fibers, non corrosive, temperature not higher than 80 ℃, viscosity of 5 × 10-6～1.5 × 10-3m2/s (5-1500cSt) lubricating oil or other liquids similar in nature to lubricating oil.

进口大流量齿轮泵Purpose of large flow gear pump: it is suitable for conveying without solid particles and fibers, without corrosivity, with temperature not higher than 80 ℃ and viscosity of 5 × 10-6～1.5 × 10-3m2/s (5-1500cSt) lubricating oil or other liquids similar in nature to lubricating oil.

Application scope of large flow gear pump: it can be used as transmission and booster pump in oil transmission system; It can be used as a fuel pump for delivery, pressurization and injection in the fuel system; It can be used as lubricating oil pump in all industrial fields.

Structural features of large flow gear pump: this series of gear pump is mainly composed of gear, shaft, pump body, safety valve and shaft end seal. The gear has high hardness and strength after heat treatment, and is installed in the replaceable shaft sleeve together with the shaft for operation. The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working. There are reasonably designed oil drain and oil return grooves in the pump, which make the gear bear the minimum torque force during operation, so the bearing load is small, the wear is small, and the pump efficiency is high.

The pump is equipped with a safety valve for overload protection. The total return pressure of the safety valve is 1.5 times of the rated discharge pressure of the pump, which can also be adjusted according to actual needs within the allowable discharge pressure range. However, it should be noted that this safety valve cannot be used as a pressure reducing valve for a long time, and can be separately installed on the pipeline if necessary. Seen from the extended end of the spindle to the pump, it rotates clockwise.（仅供参考）