水泵采购网

进口双吸液下泵-美国阿卡迪亚品牌

进口双吸液下泵Product description:

The structure is simple and practical, which also solves the shortcomings of other similar double suction submersible electric pumps, such as high suction level, complex structure, uneconomic and practical As the edge outlet and flange mounting structure of the single suction submersible electric pump with relatively mature technology is adopted, it can be either mobile or fixed by guide rail It is easy to install, maintain and use The utility model has the advantages of remarkable energy-saving effect, anti winding, non blocking, automatic installation and automatic control, etc. It has unique effect in discharging solid particles and long fiber garbage.

进口双吸液下泵Due to the unique double suction double channel structure, water enters the water from both ends of the pump impeller at the same time and flows out in the middle during the actual operation of the pump. The water inlet of the pump is divided into upper and lower parts, and both of them draw water from the bottom. The suction level in the suction direction is low. Because the water is absorbed from the upper and lower ends, one end of the isolation oil chamber of the pump is at the suction port, and it is always in a negative pressure state during operation. Compared with the single suction structure, it is not easy to leak water. Because the pump absorbs water from the upper and lower ends at the same time, the motor has no axial tension, and the dual channel structure reduces the radial force, The utility model can prolong the service life and achieve the functions of durability, stability and practicability.

进口双吸液下泵characteristic:

1. The double suction submerged pump can meet the requirements for use in high lift occasions. Because the mechanical seal operates under negative pressure, it has higher stability.

2. The double lower water suction structure is adopted for low water suction level. Because of the double suction double channel single volute structure, the motor has no axial tension, reduces and balances the radial force, greatly improves the service life of the pump by 3 times, and improves the service efficiency by 15%.

3 The design of anti clogging hydraulic components with large flow passage is adopted, which greatly improves the passing capacity of sewage, and can effectively pass through five times the fiber material of the pump diameter and solid particles with a diameter of about 50% of the pump diameter.

4. The design is reasonable, the supporting motor has high efficiency and remarkable energy-saving effect.

5. The mechanical seal is a double channel tandem seal made of hard wear-resistant tungsten carbide, which is durable and wear-resistant, and can make the pump run safely and continuously for more than 8000 hours.

6. The pump features compact structure, small volume, convenient movement, simple installation, etc.

7. The liquid level automatic control cabinet can be equipped according to the user's needs to automatically control the start and stop of the pump according to the required liquid level change. It is very convenient to use without special care.

8. The pump is a vertical structure. When working, the pump body is immersed in liquid, so it is easy to start. There is no exhaust and evacuation problem. At the same time, it has no leakage and other characteristics. The depth of the liquid can reach 0.5~7 meters.

9. The coupling structure is advanced and reliable, the pump and motor are connected by coupling, and the pump shaft is of precise size, which ensures the smooth operation of the pump and leaves enough safety factor.

10. The motor shall not be overloaded within the range of operating head.

11 The pump has two types of single pipe installation and double pipe installation, and the supporting parts are disc and square plate installation.

（仅供参考）