水泵采购网

进口涡轮式搅拌器-美国阿卡迪亚品牌

进口涡轮式搅拌器Product description:

Double end grinding machine with wide adaptability, including a conveying tray, wherein the center of the outer surface of the upper end of the conveying tray is provided with a through groove, the outer surface of the upper end of the conveying tray is provided with a through hole near the edge, the inner wall of the through hole is provided with a movable groove, the inner sliding connection of the movable groove is provided with a movable rod, the outer surface of the front end of the movable rod is fixedly connected with a splint, the inner wall of the through hole is provided with a limited groove, and the outer surface of the rear end of the splint is fixedly connected with a limited rod, The limiting rod is located inside the limiting groove, and the end of the internal surface of the movable groove is provided with a threaded groove. The device can assist in clamping the connecting shaft that needs to be polished on the material handling tray, thus reducing the shaking range of the connecting shaft in the through hole during the polishing project, reducing the wear of the connecting shaft in the processing process, and clamping the connecting shafts with different diameters to improve the practicality of the device.

进口涡轮式搅拌器characteristic:

The double end grinder is a high efficiency plane processing machine tool. It can grind two parallel end faces at the same time in one processing process. It can be divided into horizontal type and vertical type according to the structure. It can also be divided into through type, rotary type and reciprocating type according to the feeding mode.

进口涡轮式搅拌器Principle:

First, adjust the bolt in the threaded groove according to the diameter of the connecting shaft. The connecting shaft is pressed into the through hole on the material handling tray through the feeding machine. At this time, the connecting shaft contacts the baffle plate on the clamping plate. In this case, the clamping plate and the movable rod are pressed to extend inward through the movable groove. However, the limit rods on both sides of the clamping plate move in the limit groove, and with the cooperation of the limit block, the probability of the offset of the clamping plate can be prevented, At this time, the connecting shaft is located between the two clamping plates, and with the cooperation of the pressure spring, it can help to clamp the connecting shaft, further rotate the material handling tray, and drive the movement in the connecting axial grinder for grinding. During the grinding process of the connecting shaft, with the cooperation of the limit slot and the limit block, it can prevent the connecting shaft from shaking in the through hole, and at the same time, a pressure spring is set in the movable slot, It can play the role of cushioning and shock absorption, reduce the hard contact between the movable rod and the bolt, and extend the service life of the device, so as to reduce the probability of the ring surface abrasion of the connecting shaft in the process of processing and grinding. When the connecting shaft is polished and rotated from the other side of the material tray, and the self weight of the connecting shaft can automatically fall off from contact with the two clamping plates, so as to facilitate the subsequent processing and grinding of the connecting shaft.

（仅供参考）