水泵采购网

进口酸碱氟塑料磁力泵-美国阿卡迪亚品牌

进口酸碱氟塑料磁力泵Product description:

进口酸碱氟塑料磁力泵The isolation sleeve made of synthetic materials has high strength mechanical properties and eliminates the magnetic eddy current phenomenon of general magnetic pumps. The unique back pull structure is adopted, which makes the internal maintenance and parts replacement simple, without dismantling the pipeline, and greatly facilitates the daily maintenance and repair work. It can be widely used in chemical industry, nonferrous metal smelting, acid and alkali making, paper making, pickling process, rare earth separation, electroplating, electronics, foil forming, acid and alkali unloading and other industries or work processes. It is one of the products with novel structure among current magnetic pump varieties, and it is energy-saving, safe and practical. The acid alkali fluorine plastic magnetic pump shall be checked before use, such as whether the rotation direction of the motor is consistent with the rotation mark of the magnetic pump; Whether the motor fan blade rotates flexibly, and whether the magnetic pump, pipeline and joint are loose. 进口酸碱氟塑料磁力泵Unscrew the water diversion screw plug of the fluoroplastic magnetic pump body for perfusion and drainage. Close the gate valve, outlet pressure gauge and inlet vacuum gauge of the water outlet pipeline. Then jog the motor to see if the rotation direction of the motor is correct. After the motor is started, the discharge valve shall be opened slowly. After the fluoroplastic magnetic pump enters the normal working state, the discharge valve shall be adjusted to the required position. When the fluoroplastic magnetic pump operates normally, the outlet pressure gauge and the inlet vacuum pump shall be opened. After the appropriate pressure is displayed, the gate valve shall be opened gradually, and the motor load shall be checked. During the use, the flow and head of the fluoroplastic magnetic pump shall be controlled within the marked range as far as possible, so as to ensure that the fluoroplastic magnetic pump operates at the efficiency point and can achieve better energy-saving effect. Before the fluoroplastic magnetic pump stops working, close the discharge valve first, and then close the valve of the suction pipe. During the work, the lubricating oil and stuffing box shall be monitored frequently, and the bearing lubricating oil in the bearing body shall be replaced or replenished timely. After the stuffing box is replaced, new packing shall be used.

（仅供参考）