水泵采购网

进口双金属片蒸汽疏水阀美国阿卡迪亚品牌

进口双金属片蒸汽疏水阀Product Description: The steam trap comprises a shell, a temperature regulating assembly and an inlet pipe, an exhaust assembly and a liquid discharge assembly arranged on the side, top and bottom of the shell. The inlet pipe comprises a pipe body, a diaphragm, a heat exchange section, a straight discharge pipe and a lower discharge pipe. The pipe body is divided into hot and cold flow channels by a diaphragm. The tail end of the pipe body is divided into two, which are respectively connected with the straight discharge pipe and the lower discharge pipe. The hot flow channel is connected with the straight discharge pipe, and the cold flow channel is connected with the lower discharge pipe. The straight discharge pipe is bent upward towards the exhaust assembly,进口双金属片蒸汽疏水阀 The lower exhaust pipe bends downward towards the inner bottom surface of the shell. The temperature regulating assembly senses the temperature in the exhaust assembly and adjusts the overflow area ratio of the hot channel and the cold channel at the heat exchange section. It senses the steam temperature at the exhaust port of the steam trap through the metal sheet and transfers one heat of the two imported working fluids to the other, so as to solve the problem that the existing trap cannot stabilize the discharged steam temperature and continuously output the steam. characteristic: Generally, the steam trap is only used to realize the basic function of water vapor separation and split discharge. For the working conditions with certain requirements for the steam temperature at the use position, the general steam trap cannot adjust the temperature. It is necessary to configure an independent heating component or temperature regulating component to adjust the steam discharged backward from the steam trap to the appropriate temperature, which will increase the device cost and control cost, and can not be linked with the steam trap, The steam flow discharged by the steam trap may cause intermittent discharge of the steam flow, which is not conducive to the effective operation of the steam pipeline Principle: A bimetallic sheet steam trap with constant temperature and current and leakage prevention. The trap includes a shell, an inlet pipe, an exhaust assembly, a liquid discharge assembly and a temperature regulating assembly. 进口双金属片蒸汽疏水阀The inlet pipe is inserted from the side wall of the shell and extends to the inside of the shell. The exhaust assembly is arranged on the upper wall of the shell, the liquid discharge assembly is arranged at the bottom of the shell, and the temperature regulating assembly is connected with the exhaust assembly and the inlet pipe. The inlet pipe includes a pipe body, a diaphragm, a heat exchange section, a straight discharge pipe and a lower discharge pipe, The pipe body is divided into two flow channels by the partition plate, which are hot flow channel and cold flow channel respectively. The tail end of the pipe body is divided into two, which are respectively connected with the straight row pipe and the lower row pipe. The hot flow channel is connected with the straight row pipe, and the cold flow channel is connected with the lower row pipe. The straight row pipe is bent upward towards the exhaust assembly, the lower row pipe is bent downward towards the inner bottom surface of the shell, and the heat exchange section is set in the middle section of the pipe body, The temperature regulating assembly senses the temperature in the exhaust assembly and adjusts the overflow area ratio of the hot runner and the cold runner at the heat exchange section. When the steam temperature in the exhaust assembly increases, increase the area ratio of the hot runner and the cold runner.

（仅供参考）