水泵采购网

进口剩余污泥泵美国阿卡迪亚品牌

进口剩余污泥泵Product description:

The utility model comprises a hanging ring, an upper cover body, a pump housing and a fixed cover. The top of the pump housing is provided with an upper cover body, and the top of the upper cover body is fixedly connected with a hanging ring. The outer wall of the pump housing is provided with a reinforcement bolt, and the top of the upper cover body is provided with a connector, and the top of the connector is fixedly connected with a wired body. By installing a connector on the top of the upper cover body, and installing a wire body on the top of the connector, a collecting structure is installed on the outer wall of the wire body. When the pump body is not in use, the wire body can be collected and straightened through the collecting structure. When the pump body is in use, the belt body is fixed on the outer wall of the wire body. When the pump body is in use, the lead connected on one side of the belt body can be wound around the wire body, Then, the clamp block set on the fixing belt connected on one side of the strip head is clamped and fixed with the clamp slot installed on the outer wall of the belt body. With this setting, the device is convenient for collecting the line body when using, preventing the line body from being disordered, and making the use more convenient.

进口剩余污泥泵characteristic:

The residual sludge pump includes a hanging ring, an upper cover body, a pump housing and a fixed cover. The top of the pump housing is installed with an upper cover body, and the top of the upper cover body is fixedly connected with a hanging ring. The outer wall of the pump housing is installed with a reinforcement pin. The top of the upper cover body is installed with a connector, and the top of the connector is fixedly connected with a wire body. The outer wall of the wire body is installed with a receiving structure, and the receiving structure includes a clamping groove, a belt body, a clamping block, a fixing belt The lead and elastic belt are installed on the outer wall of the wire body, and one side of the belt body is provided with a lead, and one side of the lead is fixedly connected with a fixing belt, and one side of the fixing belt is provided with a clamping block, the outer wall of the belt body is provided with a clamping groove, the outer wall of the lead is provided with an elastic belt, the bottom end of the pump shell is installed with a convex shell, and the bottom end of the convex shell is connected with a fixed cover, and the inside of the fixed cover is installed with a rotary impeller, One side of the fixed cover is provided with a pipe body, and the top end of the pipe body is provided with a mounting structure. The bottom end of the fixed cover is provided with a contact port, and the outer wall of the contact port is provided with a suction groove.

进口剩余污泥泵Principle:

By installing an installation structure on the top of the pipe body, the connecting pipe can be clamped with the butt joint when in use, and fixed by rotating the thread. During the clamping, the sealing rubber ring installed on the outer wall of the pipe can be contacted and squeezed for sealing, and after the clamping, the bolt can be inserted inside the butt joint block installed on both sides of the connecting pipe and the installation block to complete the fixation. Through this setting, the pipe body and the connecting pipe can be easily disassembled and used more efficiently;

（仅供参考）