进口热静力型蒸汽疏水阀美国阿卡迪亚品牌
进口热静力型蒸汽疏水阀Product Description: The utility model comprises a valve body, the valve body is threaded with a valve cover, a valve cavity is jointly opened between the valve body and the valve cover, the inner wall of the valve cavity is provided with a filter screen, the valve cavity is provided with a valve seat threaded with the valve body, the valve cavity is provided with a support, the bottom of the support is provided with a steel ball, the valve cover is threaded with an adjusting bolt, the bottom of the adjusting bolt is connected with a core sleeve through a mandrel, and both sides of the valve body are provided with connecting ports. Multiple groups of bimetallic sheets are arranged between the adjusting bolt, the mandrel and the core sleeve, 进口热静力型蒸汽疏水阀and washers are arranged between the bimetallic sheets to slow down the impact during switching, realize the protection of the mandrel and the core sleeve, significantly improve the service life of the valve and significantly reduce the noise generated when switching the valve. There is steam water at the gap between the valve seat and the support after closing, and the existence of steam water can realize the water seal at the valve core, So as to effectively prevent the steam from leaking from here. characteristic: The basic function of steam trap is to discharge the condensate, air and carbon dioxide gas in the steam system as soon as possible; At the same time, it can automatically prevent steam leakage to the greatest extent. There are many kinds of steam traps with different performances. Because the steam trap has the function of steam blocking and exhaust,进口热静力型蒸汽疏水阀 it can make the steam heating equipment heat evenly, make full use of the latent heat of steam and prevent water hammer in the steam pipeline. Principle: A steel ball is arranged at the bottom of the support, which can make the excess water stored in the gap between the valve seat and the support when contacting with the valve seat and closing the water outlet hole on the valve seat, so as to realize the effect of water seal and effectively avoid the outward discharge of steam from here. Multiple groups of bimetallic sheets are arranged between the adjusting bolt, the mandrel and the core sleeve, and washers are arranged between the bimetallic sheets to reduce the impact during switching, Realize the protection of the mandrel and core sleeve, significantly improve the service life of the valve, and significantly reduce the noise generated when opening and closing the valve; The valve cover is threaded with a regulating bolt, and the bottom of the regulating bolt is connected with a core sleeve through the core shaft. The core sleeve and the core shaft are in relative sliding contact. When the core shaft moves upward, the pressure of the core shaft on the core sleeve will be cancelled, and the support will be collided outward under the action of the spring, so that the support drives the steel ball to separate from the valve seat, so as to store and open the valve seat, so as to realize the effect of rapid and effective drainage. The core sleeve is fixedly connected with the inner wall of the support, Both sides of the valve body are provided with connecting ports, and the inner wall of the connecting port is provided with a channel penetrating into the valve cavity.
(仅供参考)
配件编号 | 配件名称 | 规格 | 材质 | 单位 | 定性 | 价格(元) | 库存 | 供货期 |
---|