水泵采购网

进口热动力型蒸汽疏水阀美国阿卡迪亚品牌

进口热动力型蒸汽疏水阀Product Description: The utility model comprises a valve body, the valve body is fixedly connected with the valve seat, the valve cover is slidably connected with the valve seat, the valve seat is fixedly connected with the valve seat, the valve cover is slidably connected with the valve seat, the valve seat is provided with an inflow groove and an outflow groove, the inflow groove is connected with the valve body, the outflow groove is connected with the valve seat, a valve plate is arranged between the valve cover and the valve seat, the valve plate conflicts with the valve cover and the valve seat, and a spring is arranged between the valve body and the valve cover. When the steam and condensate enter from the port of the valve body, the expansion liquid will absorb the heat energy and then vaporize.进口热动力型蒸汽疏水阀 The valve plate is pushed to the valve seat to block the inflow groove and outflow groove. When the steam condenses and the condensate reaches a certain amount, the converted gas lacks heat energy and is converted into liquid again, so that the condensate flows out of the port of the valve body seat through the outflow groove, which overcomes the problem of deformation and bending caused by the jacking up of the valve plate by condensate and steam, It will not cause metal fatigue of the valve plate, which increases the service life of the drain valve. characteristic: The function of steam trap is to automatically exclude non condensable gases such as steam condensate and air in heating equipment or steam pipeline without leakage of steam. Among them, thermal power trap is one of steam traps, which mainly depends on the different thermodynamic principles of flow rate and volume change when steam and condensate pass through, so that there is a pressure difference between the upper and lower sides of the valve plate, so as to drive the valve plate to open or close the valve. 进口热动力型蒸汽疏水阀Principle: The main driving force of the thermal power steam trap is steam. When a certain amount of condensate enters the steam trap, the valve plate will be opened and then left from the steam trap. After the steam enters the steam trap, the valve plate will also be opened. The steam will enter the upper space of the valve plate to form a certain pressure and close the valve. After a period of time, the steam condenses and the pressure drops, and the condensate will open the valve plate again for drainage. In this process, the valve plate works frequently, The short service life leads to the need for frequent replacement of new traps. The reason is that the valve plate is constantly jacked up by condensate and steam, resulting in continuous deformation and bending of the valve plate, which is easy to cause metal fatigue of the valve plate.

（仅供参考）