水泵采购网

进口切割式排污潜水泵美国阿卡迪亚品牌

进口切割式排污潜水泵Product Description:

It relates to the field of sewage discharge technology. An anti clogging cutting sewage submersible pump comprises a base, a pump body, a motor base and a main shaft, the top of the base is fixedly installed with a pump base, the top of the pump base is fixedly connected with a pump body, the external wall surface of the pump is threaded with connecting screws, one side of the external wall surface of the pump is installed with a radiator, the top of the external wall surface of the radiator is installed with an exhaust, the right side of the external wall surface of the exhaust is installed with a radiator, and the top of the external wall surface of the radiator is threaded with a cover, The main shaft is installed at the center of the inner wall of the pump body, and the outer wall of the main shaft is installed with a fixed sleeve, the right side of the fixed sleeve is installed with a rotor connector, the right side of the rotor connector is fixedly connected with a motor base, and one side of the outer wall of the motor base is installed with a motor detection port, the bottom of the outer wall of the motor base is connected with a branch pipe, and one side of the end face of the pipe is installed with a water outlet pipe

进口切割式排污潜水泵characteristic:

The submersible sewage pump is a submersible sewage pump, which can tear and cut off the long fibers, bags, belts, grass, cloth and other substances in the sewage, and then discharge them smoothly. It is especially suitable for conveying liquids containing hard solids and fibers, as well as particularly dirty, sticky and slippery liquids; There are two types: submersible sewage pump; In order to improve the service life of submersible sewage pumps, most manufacturers at home and abroad have tried to find a way on the pump protection system, that is, in case of pump leakage, overload, over temperature and other faults, it can give an automatic alarm and automatically shut down for maintenance; However, it is necessary to set up a protection system in the sewage pump, which can effectively protect the safe operation of the electric pump; However, this is not the key to the problem. The protection system is just a remedy after the pump fails. It is a passive method; The key to the problem should be to start from the root and thoroughly solve the problems of pump sealing and overload, which is a more active method; Therefore, the hydrodynamic sealing technology of the auxiliary impeller and the non overload design technology of the pump are applied to the submersible sewage pump, which greatly improves the sealing reliability and bearing capacity of the pump and prolongs the service life of the pump.

进口切割式排污潜水泵Principle:

The pump body comprises a connecting bolt, a rotor, a clearance adjusting block and an impeller. One side of the outer wall of the pump is threaded with a connecting bolt, and the inner wall of the pump is rotationally connected with a rotor. The outer wall clearance of the rotor is matched with a clearance adjusting block, and an impeller is installed on the top of the rotor, so that the radial clearance of the rotor can be quickly adjusted.

（仅供参考）