水泵采购网

进口潜水无轴推流器美国阿卡迪亚品牌

进口潜水无轴推流器Product description:

The utility model comprises a housing base, in which a stator, a propeller rotor and fasteners are connected, a stator coil winding is embedded in the stator, a number of rotor center positioning permanent magnetic steel blocks are also fixed in the stator, a gap is arranged between the rotor center positioning permanent magnetic steel block and the propeller rotor in the radial direction, the propeller rotor comprises a hollow ring, a permanent magnetic steel ring is embedded in the ring, and several propeller blades are uniformly distributed on the inner circumference of the ring, There is a gap between the left and right permanent magnetic steel rings and the side of the propeller rotor. The permanent magnetic steel block positioned in the center of the rotor is opposite to the permanent magnetic steel ring of the rotor in the circumferential radial direction; The stator and shell of the middle thruster are designed in an integrated way. The rotor propeller of the integrated design is suspended in the thruster shell. The shell becomes a part of the diversion of the submersible shaftless thruster. It has the characteristics of small volume, simple structure, long service life, low noise, etc.

进口潜水无轴推流器characteristic:

Submersible plug is suitable for industrial and urban sewage treatment plants in aerobic tanks and anaerobic tanks. It is an indispensable key equipment with high technical content to plug and renew sewage, improve oxygen content and prevent sedimentation. At present, the submersible thrusters used at home and abroad are mainly composed of motors, reducers, propellers, transmission shafts, etc. The propellers are directly driven by the motors through the reducers. The liquid is sucked in from the front of the spiral blades, and then shot out from the back after being accelerated by the spiral blades, so as to promote the flow of liquid and generate the flow of thrust. Because of the existence of this central shaft, the passage for liquid to be sucked in from the front and discharged from the back is blocked.

进口潜水无轴推流器Principle:

The propeller rotor consists of a hollow ring, which is built with a rotor permanent magnetic steel ring. Several spiral blades are evenly distributed on the inner circumference of the ring. The left and right permanent magnetic steel rings are respectively set on the left and right sides of the stator and propeller rotor as the axial positioning of the propeller rotor and fixed in the left and right magnetic steel ring seats. There is a gap between the left and right permanent magnetic steel rings and the side of the propeller rotor, The rotor center positioning permanent magnetic steel block and the rotor permanent magnetic steel ring of the rotor have opposite polarity in the circumferential radial direction; There are left and right deflectors on the outside of the left and right magnetic steel ring seats, and the left and right deflectors are respectively fixed by fasteners.

（仅供参考）