水泵采购网

进口潜水回流泵美国阿卡迪亚品牌

进口潜水回流泵Product Description:

Including main engine, installation system and electric control equipment; By setting mechanical seals and sealing rings, two independent mechanical seals are set on the outside of the motor shaft to seal between the guide cylinder and the motor shaft, so as to prevent sewage from entering between the guide cylinder and the motor shaft. At the same time, a protective jacket is set on the outside of the cable, and a sealing ring is set between the protective jacket and the guide cylinder, so that the sealing ring can seal between the protective jacket and the guide cylinder, Prevent sewage from entering between the protective jacket and the diversion cylinder, and the sealing ring protects the cable. The outer side of the protective jacket is set with a bump between the bottom end of the sealing ring and the diversion cylinder to prevent sewage from entering between the cable and the sealing ring, so as to seal more tightly, thus ensuring the safe use of the submersible pump.

进口潜水回流泵characteristic:

The submersible reflux pump is a product developed on the basis of the production technology of the submersible mixer. The pump is a special equipment for mixed liquid reflux and reverse denitrification and denitrification in the secondary sewage treatment plant, and can be used in a large number of places requiring micro lift in surface water supply and drainage projects.

进口潜水回流泵Principle:

The submersible reflux pump, including the main engine, installation system and electric control equipment, is internally provided with a diversion cylinder, internally provided with a submersible motor, the inner side of the submersible motor is rotationally connected with a motor shaft, one end of the motor shaft is fixedly connected with an impeller, a front-end cover is set between the impeller and the diversion cylinder, and the outer side of the motor shaft is located inside the diversion cylinder and the front-end cover, and mechanical seals are set, A cable is arranged at the end away from the impeller inside the guide cylinder, a protective jacket is arranged at the outside of the cable, the protective jacket runs through one side of the guide cylinder, a sealing ring is arranged between the protective jacket and the guide cylinder, a bump is arranged between the bottom end of the sealing ring and the guide cylinder at the outside of the protective jacket, the end away from the impeller outside the guide cylinder is fixedly connected with a mounting foot, and a wall pipe is coupled at one side of the host through a flange, The through wall pipe is fixedly connected to the lower end of the wall, and the end of the through wall pipe away from the host is provided with a flap door.

（仅供参考）