水泵采购网

进口气动套筒调节阀美国阿卡迪亚品牌

进口气动套筒调节阀Product description:

The utility model comprises a valve body and a sleeve, the left side of the valve body is provided with a water outlet, the right side of the valve body is provided with a water inlet, and the top of the valve body is provided with a valve rod; Install the compression resistance component at the water inlet of the valve body, and use the compression resistance plate in the compression resistance component to guide the water flow. The installation of the connection frame can support the pressure plate and ensure the stability of the compression resistance plate. When the impact force is received, the compression resistance plate will transfer the force to the spring, and use the spring force to offset the impact force of the water flow and reduce the impact force on the inner wall of the valve body, The service life of the valve body is extended, and the cooperation of the limiting cylinder and the limiting hole can limit the moving compression plate, and at the same time, the problem of water flow contacting the spring is avoided.

进口气动套筒调节阀characteristic:

The sleeve type regulating valve ensures the smooth flow of water by setting a sleeve in the regulating valve and setting a throttling window on the sleeve. The sleeve type regulating valve has the characteristics of simple structure and convenient disassembly and assembly, but it still has the problem of weak water pressure resistance. When opening and closing the valve, the water flow will produce a large impact force, which is mostly concentrated in the curve of the valve inner wall, This in turn leads to the stamping from the inner wall of the valve to the water flow, seriously wasting the service life of the valve.

进口气动套筒调节阀Principle:

The rubber block and rubber ring are used for butt jointing to enhance the sealing between the valve rod and the sleeve, so as to avoid the overflow of water when the valve is closed. When the valve rod is pushed down, the ejector rod on the bottom plate is used to compress the airbag, so that the gas inside the airbag enters the rubber air cushion, and the rubber air cushion is used to inflate into the arc groove of the rubber ring, further improving the sealing effect on the sleeve.

（仅供参考）