水泵采购网

进口螺杆制冷压缩机美国阿卡迪亚品牌

进口螺杆制冷压缩机Product Description:

The motor stator clamping device comprises a lifting ring, a limit hook groove, a sleeve, a mandrel, a lubrication protective layer, an internal expansion claw clamping component, a positioning seat and a crash protective sleeve. The upper end of the mandrel is fixedly provided with a lifting ring, the upper end of the ring core of the lifting ring is provided with a limited hook groove, one end of the mandrel is arranged in the sleeve, a lubrication protective layer is arranged between the mandrel and the sleeve, the internal expansion claw clamping component is sleeved on the mandrel, the positioning seat at the bottom of the mandrel, and the outer end of the positioning seat is clamped to the crash protective sleeve, The limit hook groove can hook the hook of the crane into it and fix it. When the crane shakes violently, it can ensure the fixity of the hook and the lifting ring of the motor stator, so that the motor stator will not fall off; Strengthening the boss can protect the clamping block, avoid the direct contact and friction between the clamping block and the inner end of the motor stator during use, and the extrusion force will not directly act on the clamping block, effectively extending the service life of the clamping block.

进口螺杆制冷压缩机characteristic:

The motor stator of the permanent magnet variable-frequency screw refrigeration compressor and the motor housing are assembled together. Due to the heavy weight of the stator, the motor stator that needs to be clamped by the clamping device during assembly is usually hoisted by hooking the clamping device through the hook of the crane. The structural design of the clamping device used for the motor stator of the permanent magnet variable-frequency screw refrigeration compressor is unreasonable, and the hook of the crane is usually directly hooked to the lifting ring, which has poor fixation, When the crane shakes violently, the motor stator may fall off, which is a potential safety hazard; Moreover, after long-term use, both ends of the clamping block are extruded by the inner end of the motor stator and extruded and rubbed by the connecting rod, which is very easy to wear and even deform, affecting the service life of the clamping block. Therefore, it is urgent for those skilled in the art to design a new type of refrigeration compressor motor stator clamping device.

进口螺杆制冷压缩机Principle:

The upper end of the mandrel is fixed with a lifting ring, and the upper end of the ring core is provided with a limited hook groove, which can hook the hook of the crane into it and fix it, so as to ensure the fixity of the hook and the lifting ring of the motor stator when the crane shakes violently, so that the motor stator will not fall off; The internal expansion claw clamping assembly includes an upper support block, a connecting rod, a clamping block, a reinforcing boss and a lower support block. The lower end of the upper support block is provided with a lower support block. One end of the upper support block and the lower support block are hinged with the connecting rod, and the other end of the connecting rod is hinged with the clamping block. The other end of the clamping block is welded with a reinforcing boss, which can protect the clamping block, At the same time, it can avoid the direct contact and friction between the clamping block and the inner end of the motor stator when in use. At the same time, the extrusion force will not directly act on the clamping block, effectively extending the service life of the clamping block. The reinforced bump is cast into an integrated structure by alloy, with high alloy strength, which can effectively extend the service life of the reinforced bump

（仅供参考）