水泵采购网

进口罗茨流量计美国阿卡迪亚品牌

进口罗茨流量计Product Description: The utility model relates to a numerical control fixture for processing, which comprises a working box, a rotating plate and a worktable, the rotating plate is arranged on the top of the working box, and the worktable is arranged on the top of the rotating plate, which relates to the technical field of numerical control processing. Through the cooperation between the two-way threaded rod and the threaded sleeve, and through the limit of the sliding rod and the chute, the workpiece to be processed by the clamping plate is clamped, and through the setting of the movable frame, the clamping plate uses multiple damping springs to buffer the clamping force of the workpiece during the clamping process, so as to avoid the damage of the clamping plate to the workpiece, improve the clamping effect of the clamping plate on the workpiece, and improve the production efficiency of the device, 进口罗茨流量计Through the cooperation of L-shaped indicator rod and scale plate, the workpiece can be measured while processing, so that the quality of the processed Roots flowmeter is guaranteed and the production efficiency is improved. characteristic: Roots flowmeter, also known as waist wheel flowmeter, is mainly used for continuous or intermittent measurement of gas or liquid flow in pipeline. The existing fixture for NC tooling processing of Roots flowmeter is not equipped with a buffer device. If the clamping force of the workpiece to be processed is too large, it will lead to the damage of the workpiece or fixture,进口罗茨流量计 resulting in the low utilization rate of the fixture and the inability to process for a long time. In addition, the existing fixture for NC tooling processing of Roots flowmeter is not equipped with a measuring device, and the dimension of the workpiece cannot be measured during processing, The staff cannot know whether the size of the processed workpiece is accurate, resulting in the processed workpiece may be unqualified and the processing cost is high. When the existing fixture for NC tooling processing of Roots flowmeter processes the workpiece, it is unable to rotate and adjust the angle of the workpiece. The staff need to change the processing angle of the workpiece to continue processing, which affects the work efficiency and cannot meet the use needs of production. Principle: One side of the top of the rotating plate is fixedly installed with a support frame, the other side of the top of the rotating plate is fixedly installed with a first motor through the mounting plate, the first motor is a servo motor, which can control the forward and reverse rotation, the output shaft of the first motor is fixedly installed with a two-way threaded rod through the coupling, the threads on both sides of the two-way threaded rod surface are arranged opposite, and one end of the two-way threaded rod rotates with one side of the support frame through the bearing连接。

（仅供参考）