水泵采购网

进口降低活塞式流量调节阀美国阿卡迪亚品牌

进口降低活塞式流量调节阀Product Description:

Service life. One end of the valve body is provided with an inlet, the interior of the inlet is provided with a filter plate, and the filter plate is connected with the valve body throu screws. The filter plate includes a fixed frame, a fixed hole and a filter screen. The fixed hole is arranged inside the inner wall of the other end of the fixed frame, and four fixed holes are arranged. The interior of the valve body is provided with a guide valve core, which is fixedly connected with the valve body. The interior of the guide valve core is provided with a sliding sleeve, and the interior of the sliding sleeve is provided with a piston sleeve, The piston sleeve extends to the outside of the sliding sleeve, a rolling groove is arranged inside the outer wall of the piston sleeve, a ball is installed inside the rolling groove, and one end of the ball extends to the rolling groove and is connected with the sliding sleeve.

进口降低活塞式流量调节阀characteristic:

The piston type flow regulating valve is characterized in that: a shell is installed on one side of the front end of the valve body, and the shell is connected with the valve body throu flange, a transmission shaft is installed inside the shell, and the transmission shaft is connected with the shell through bearing, one end of the transmission shaft extends to the inside of the crank sliding mechanism away from the end of the piston sleeve, and is fixedly connected with the crank sliding mechanism through shaft sleeve, and a turbine is installed outside the other end of the transmission shaft, A worm is installed on one side of the worm, and the worm and the worm are meshed and connected. The upper end of the worm is installed with a rotating handle, and the rotating handle is fixedly connected with the worm.

进口降低活塞式流量调节阀Principle:

A shell is installed on one side of the front end of the valve body, and the shell is connected with the valve body through a flange. A transmission shaft is installed inside the shell, and the transmission shaft is connected with the shell through a bearing. One end of the transmission shaft extends to the inside of the end of the crank sliding mechanism away from the piston sleeve and is fixedly connected with the crank sliding mechanism through a shaft sleeve. A turbine is installed on the outside of the other end of the transmission shaft, a worm is installed on one side of the turbine, and the turbine is meshed with the worm, A rotary handle is installed at the upper end of the worm, and the rotary handle is fixedly connected with the worm.

（仅供参考）