水泵采购网

进口好氧池潜水搅拌器美国阿卡迪亚品牌

进口好氧池潜水搅拌器Product description:

The support consists of a base, a guide rod and a lifting bracket. The base is fixed at the bottom of the inner side of the tank, the lifting bracket is installed at the upper end of the tank wall, the base is fixed with a guide rod, the sliding sleeve outside the guide rod is provided with a guide tube for installing the submersible mixer, the top end of the guide rod is also provided with a positioning pressure plate fixed by a nut, the middle side wall of the guide tube is provided with a lug, the lifting bracket is installed with a lifting device, and the lifting device is provided with a pull rope, The lower end of the pull rope is connected with a hook, which is embedded in the lug. The support of the integral lifting submersible mixer is simple in structure and easy to assemble and disassemble. It is an integrated structure with the submersible mixer. The submersible mixer is lifted simultaneously through the conduit set outside the lifting guide rod, which is not easy to get stuck during lifting and has high operating efficiency; It is made of stainless steel, with good corrosion resistance and long service life.

进口好氧池潜水搅拌器characteristic:

Submersible mixer is an important equipment used in the process flow of sewage treatment plant to promote the mixing of sewage containing suspended solids, thin mud, industrial process liquid, etc., create water flow, strengthen the mixing function, and prevent sludge sedimentation. The submersible mixer works below the water surface, so a special support system is necessary for the lifting, support and fixation of the submersible mixer.

进口好氧池潜水搅拌器Principle:

During installation, the lifting device shall be fixedly connected with the lifting bracket, and then the lifting bracket shall be fixed on the upper end face of the pool wall; Then fix the guide rod on the base, fix and connect the lower part of the submersible mixer and the tremie through the flange, lift the tremie together with the submersible mixer with a lifting device, sleeve the tremie from the upper end of the guide rod, and slowly send it into the pool underwater. After it is in place, connect the fixed flange with the positioning flange of the pool wall, and then press the pressing plate at the top of the guide rod through the nut to complete the installation; When disassembling, remove the pressing plate and lift the tremie together with the submersible mixer by using the lifting device.

（仅供参考）