水泵采购网

进口离心式多级泵美国阿卡迪亚品牌

进口离心式多级泵Product Description:

It includes the pump body. The drive shaft in the pump body cavity is sleeved with a suction impeller group and a discharge impeller group arranged along the length direction. The suction impeller group and the discharge impeller group are symmetrically arranged. The smooth pipe cavity of the pump body is provided with a transition component that divides its cavity into a suction cavity and a discharge cavity. By setting a transition component, the suction impeller group sucks materials from the feed inlet and leads them to the discharge cavity through the transition component, The discharge impeller group in the discharge chamber guides the materials in the discharge chamber to the outside of the discharge port of the pump body through the ferry assembly. The feed port is located at one end of the pump, and the discharge port is located in the middle of the pump body. The area occupied by the other end of the pump will be reduced, so that the pump can be installed in a narrower space, which is more convenient for installation and has a wide range of applications. At the same time, the overall friction loss efficiency and the pumped material loss efficiency are small, So as to achieve performance stability.

进口离心式多级泵characteristic:

The pump is an energy device that converts the energy output by the prime mover into medium pressure energy. The pump is mainly used to transport liquids, including water, oil, acid-base liquid, emulsion ring liquid, liquid metal, etc. it can also transport gas mixtures and liquids containing suspended solids. The pump can be used in agriculture, chemical industry, petroleum production, mining and metallurgical industry, electric power, etc. in these application fields, the installation space is often limited. The traditional centrifugal pump is difficult to install in a narrow space due to structural problems. The pump body usually has annular protrusions, and the feed inlet and discharge outlet of the pump are usually located at both ends of the pump body. The feed inlet and discharge outlet need to occupy a lot of space, At this time, the pump will occupy a large space, and the pump body cannot be installed in a narrow space, which is inconvenient for disassembly and assembly. At the same time, due to the complex structure, the economic benefit is low.

Principle:

By setting the transition assembly, the suction impeller group will suck the materials from the feed inlet and guide them to the discharge chamber through the ferry assembly, and the discharge impeller group in the discharge chamber will guide the materials in the discharge chamber outside the discharge port of the pump body through the ferry assembly. The structure of the pump chamber is reasonably arranged, which will not affect the function of the pump, but also shorten the distance between the feed port and the discharge port. In this embodiment, the feed port is located at one end of the pump, While the discharge port is located in the middle of the pump body, the area occupied by the other end of the pump will be reduced, that is, the feed port and discharge port only occupy half of the pump body, so that the pump can be installed in a narrower space, which is more convenient for installation and wide range of use. At the same time, the overall friction loss efficiency and the pumped material loss efficiency are small, so as to achieve performance stability.

（仅供参考）