水泵采购网

进口科氏质量流量传感器美国阿卡迪亚品牌

进口科氏质量流量传感器产品描述：

The sensor comprises two parallel measuring tubes, a fluid distributor, a flange, a support tube, a driving component, two detecting components, a circuit board and a fixed base. The two measuring pipes are parallel and arranged at intervals, the two ends of the measuring pipe are fixedly connected with the flange through the fluid separation, and a support pipe is fixedly connected between the two fluid separation; A driving part is arranged at the bottom of the measuring tube, a detection part is arranged on both sides of the measuring tube, a fixed seat is arranged on the side of the supporting tube close to the measuring tube, a circuit board is fixed on the fixed seat, and both the driving part and the detection part are electrically connected with the circuit board. The sensor provided solves the problems that the wire is arranged on the measuring tube in the prior art, which affects the vibration of the measuring tube, thereby reducing the measurement accuracy of the sensor, and the sensing performance is unstable; The sensor has high measurement accuracy and good stability.

进口科氏质量流量传感器characteristic:

Coriolis mass flowmeter is referred to as Coriolis mass flowmeter or Coriolis mass flow sensor for short. It is an instrument that directly measures the mass flow by using the principle of Coriolis force proportional to the mass flow generated by the flow of fluid in the vibrating tube. It has been widely used in petrochemical, pharmaceutical, food and other fields.

进口科氏质量流量传感器Principle:

The sensor comprises a support tube, which is a tubular structure with slots at both ends and plays a supporting role. A pair of first through slots are set at the left and right sides of the bottom of the support pipe for threading the measuring pipe. After passing through the first through slot, the measuring pipe is fixedly connected with the distributor at both ends of the support pipe. The upper part of the middle position of the support pipe is provided with a branch pipe part, which is used to support the transmitter (not shown in the figure). The middle position of the support pipe is provided with a pair of second through slots, which are used to pass through the connecting lines connected with the transmitter. The second through groove is located in the center of the branch pipe assembly when viewed from the outside to the inside of the branch pipe assembly. It should be noted that the function of the transmitter is to detect the measured parameters and transmit the measured values in a specific signal form for display. In this embodiment, the transmitter can display the measured value of mass flow and other parameters.

（仅供参考）