水泵采购网

进口聚氨酯潜水搅拌器美国阿卡迪亚品牌

进口聚氨酯潜水搅拌器Product Description:

The lifting device of the submersible thruster is fixed on the installation foundation of the pool surface, the sliding guide rail is fixed with the connecting plate and the installation foundation of the pool bottom, the cross beam of the coupling seat is fixed with the sliding guide rail, the support of the coupling seat is fixed with the cross beam of the coupling seat and the installation foundation of the pool bottom, the vertical spacing between the front coupling seat and the rear coupling seat is fixed on the cross beam of the coupling seat, the rear end of the main engine of the submersible thruster is set with a tail wing, and the front end is set with a lifting point, The lifting point is in front of the gravity center of the submersible thruster main engine. The tail wing includes two wings. The front end between the tail wings is provided with a rail pulley and a load pulley. The rear end between the tail wings is provided with a limit pulley. The two wings and three pulleys of the tail wing form a connecting sliding cavity. The sliding track is embedded in the sliding cavity. The tail wing and the sliding track are in the state of a moving pair. The pulley and the sliding track are in the state of a moving pair and a rotating pair at the same time. The tail wing, the pulley and the sliding track form a sliding structure And in the embedded moving state.

进口聚氨酯潜水搅拌器characteristic:

In the sewage treatment industry, submersible thrusters are widely used in anaerobic tanks, anoxic tanks and aeration tanks. Generally, the depth of the tank is about 5 ~ 7 meters. The submersible thrusters normally work at the position 1.5 meters below the bottom of the tank. They can mix sewage, stir sludge, promote the flow of water medium, maintain the flow rate at the bottom of the tank ≥ 0.3m/s, prevent sludge sedimentation and improve the efficiency of sewage treatment. Due to the high technical content and high import rate of the equipment, it has a great influence on the standard discharge of sewage effluent treatment, and the market consumption is large. Conventional submersible thruster equipment includes submersible thruster host, lifting device, underwater sliding guide rail, underwater support frame, and installation foundation of pool surface and bottom. The tail wing of the thruster host is provided with sliding mechanism. The traditional practice at home and abroad is to design two groups of symmetrically arranged pulleys in front of and behind the guide rail, or two groups of pulley limit at the rear end and direct large plane rail at the front end, Its underwater support frame is generally a simple flat plate or circular tube structure. The thruster has two states: lifting and sliding and in place operation. During sliding, the thruster is lifted by the lifting device, and the thruster slides down along the underwater guide rail through the tail sliding mechanism. When sliding to the support frame at the lower end of the guide rail, it stops. During operation, the thruster is in the working state after it is in place on the underwater support frame

进口聚氨酯潜水搅拌器Principle:

The lifting device is fixed on the installation foundation of the pool surface and used to lift the submersible thruster host to slide along the sliding guide rail. A sliding guide rail is set between the installation foundation of the pool surface and the installation foundation of the pool bottom. The lower end of the sliding guide rail is fixedly welded and installed on the installation foundation of the pool bottom, and the upper end is welded and fixed on the installation foundation of the pool surface through the connecting plate. The sliding guide rail is not only the guide rail for the sliding of the thruster host, but also the underwater installation, connection, support The main framework in place is firmly fixed on the installation foundation of the pool surface and bottom, and the cross beam of the coupling seat is welded at the lower position of the sliding guide rail. The cross beam is horizontally extended forward, the cross section size of the cross beam is the same as that of the sliding guide rail, and the central section of the cross beam is aligned with the central section of the sliding guide rail to form the same central plane, which together serves as the positioning reference for the installation of the coupling seat. The lower part of the forward end of the cross beam is connected to the upper end of the fixed coupling seat support, The vertical support at the bottom end of the coupling base support is welded and fixed on the installation foundation at the pool bottom. The sliding guide rail and the coupling base support are vertically parallel at a certain distance. The two coupling bases are mounted vertically and fixed on the beam. The two coupling bases are vertically arranged at a certain distance. Their positions are consistent with the cylindrical fulcrum during the coupling of the thruster host. The sliding guide rail, the coupling base, the coupling base beam and the coupling base support constitute the underwater placement system of the submersible thruster.

（仅供参考）