水泵采购网

进口工程塑料磁力泵美国阿卡迪亚品牌

进口工程塑料磁力泵Product description:

The magnetic pump box comprises a magnetic pump box, a magnetic outer ring and a magnetic inner ring. The main body of the magnetic pump box is a pipe structure. The two ends of the magnetic pump box are fixedly connected with the first flange and the second flange respectively. The middle part of the main body of the magnetic pump box is symmetrically provided with four slot holes. The inner cavity of the magnetic pump box is movably embedded with a regulating bracket. The sides of the regulating bracket are symmetrically extended with four support arms, which penetrate the corresponding four slot holes and extend to the outer surface of the magnetic pump box, The middle part of the adjusting bracket is fitted and fixed with a bearing group, and the inner ring of the bearing group is rotated and connected with a spline sleeve in series. By setting the screw to rotate, the adjustment bracket is driven to move along the direction of the three guide rods, resulting in the position change between the magnetic inner ring and the magnetic outer ring, the increase or decrease of the coupling magnetic force, and the adjustment of the output flow and flow rate of the magnetic pump.

进口工程塑料磁力泵characteristic:

The magnetic pump is a new type of pump that applies the principle of modern magnetic mechanics and uses the magnetic transmission of permanent magnets to realize the non-contact transmission of torque. That is, when the motor drives the outer rotor assembly to rotate, the magnetic line of force passes through the isolation sleeve to drive the inner rotor assembly and the impeller to rotate synchronously. The flow passage parts are all made of fluoroplastics and can transport corrosive media such as acid, alkali and oxidant of any concentration, The isolation sleeve is made of special materials with high strength mechanical properties, which eliminates the magnetic eddy current phenomenon existing in the magnetic pump. Since the medium is enclosed in the static isolation sleeve, the purpose of pumping the medium without leakage is achieved. The magnetic pump is widely used in the chemical industry, pharmaceutical industry, electroplating industry, metal industry and the production of rare earth elements.

Principle:

The drive motor outputs the transmission power through the spline shaft, which drives the spline sleeve and magnetic outer ring to rotate, and drives the magnetic inner ring to rotate through the coupling magnetic force. The magnetic inner ring is embedded in the inner cavity of the magnetic outer ring and keeps the magnetic coupling. When the relative position of the two changes, the coupling magnetic force changes accordingly, and the speed and torque of the pump blade coaxial connected with the magnetic inner ring change, The flow and velocity of the fluid pumped by the pump blade change, so that the output of the pump can be adjusted according to the displacement of the regulating bracket.

（仅供参考）