水泵采购网

进口隔膜增压泵美国阿卡迪亚品牌

进口隔膜增压泵Product Description:

The pump casing includes the pump casing body, water inlet pipe and water outlet pipe. The two sides of the pump casing body are fixedly provided with fixed blocks. There are four fixed blocks. The upper surface of each fixed block is penetrated with screw holes, and the inside of the screw holes are movably inserted with fastening screws. The pump casing body is fixedly connected with the equipment through fastening screws. The upper surface of the pump casing body is provided with a pump casing cover plate, and the two sides of the pump casing cover plate are fixedly provided with connecting plates, The upper surface of the connecting plate is provided with a number of screws, and the pump housing cover plate is fixedly connected with the upper surface of the pump housing body through the screws. Through the installation of a heat dissipation plate, the heat generated during the long-term action of the booster pump will be emitted through the vent holes opened on the heat dissipation plate to prevent excessive heat accumulation from causing the burning of the diaphragm booster pump, greatly extending the service life of the device.

进口隔膜增压泵characteristic:

By installing the water inlet connecting pipe, water outlet connecting pipe, clamping groove and clamping block, when connecting the device with the connecting pipe, it is only necessary to align the clamping block set on the connecting pipe with the inside of the clamping groove set on the water inlet connecting pipe and water outlet connecting pipe, so that the clamping block and the clamping groove are connected, so as to fix the connecting pipe with the water inlet connecting pipe and the water outlet connecting pipe respectively, and then move the sealing ferrule to the threaded groove, Then screw the sealing ring to connect it with the thread groove. In this way, the soft rubber gasket set inside the sealing ring will block the block and the groove, so as to prevent the water leakage caused by the booster pump pressurization during use, improve the tightness of the device, and the snap connection method is more convenient for disassembly and installation, reduce the trouble of manual maintenance, and improve the performance of the device.

进口隔膜增压泵Principle:

Both the pump casing body and the pump casing cover plate are provided with sound-absorbing plates. Plastic plates are fixed on the upper and lower sides of the sound-absorbing plates. When the diaphragm booster pump operates, the noise generated by the booster pump and the motor can be effectively absorbed by the sound-absorbing plate 16, which reduces the interference of the sound to the outside world and improves the usability of the device.

、（仅供参考）