水泵采购网

进口高扬程程切割式潜水排污泵美国阿卡迪亚品牌

进口高扬程切割式潜水排污泵Product Description:

The utility model comprises a sewage pump shell, a support rod and a cross rod. A cable interface is arranged above the sewage pump shell, and a waterproof cover is installed on the top. A hook is arranged above the waterproof cover, and it is connected with the connecting rod through a fixed block. A mounting plate is arranged on the support rod, and the support rod is connected with the fixed piece through the connecting block. The holes arranged on the fixed piece are fixed with bolts, and the cross rod is arranged below the support rod, One side of the sewage pump shell is provided with a volute, and a base is fixed under the volute. The high lift cut-off submersible sewage pump is welded with a waterproof cover at the upper end of the sewage pump shell, which can play a good role in waterproof protection of the cable interface. The fixing block can be fixed with the support rod. The material of the fixing piece is soft, which can fix the sewage pumps with different widths.

进口高扬程程切割式潜水排污泵characteristic:

The blowdown pump is a very important component in the blowdown system. With the progress of science and technology and the increasing demand of people, the simple blowdown pump can no longer meet the general requirements for submersible blowdown, so the high head cutting sewage pump came into being. The high head can raise the height of water as high as possible, and the cutting device used in the blowdown pump can stir and chop up the dirt in the water, which not only speeds up the flow rate of water, It can also effectively prevent the sewage pump from being blocked by dirt. However, the installation method of most high lift cutting submersible sewage pumps is relatively single, which is inconvenient to change the installation method according to different installation locations. Moreover, because the cable interface is exposed to the outside, poor waterproof can easily lead to poor contact of the cable interface, which will affect the subsequent operation of the sewage pump.

Principle:

Working principle: firstly, the connecting rods with different lengths can be selected according to different installation locations, and then one end of the connecting rod can be fixed on the fixing block. Then, the supporting rod and the other end of the connecting rod can be connected and fixed mutually. Then, the fixing plates on both sides of the supporting rod can be contacted with the sewage pump shell, and the fixing plates can be fixed with bolts on the holes nearest to both sides of the sewage pump shell, The sewage pump shell can be connected with the support rod, and then the mounting plate can be fixed with the mounting point through the mounting hole. Such a setting makes the high lift cut-off submersible sewage pump no longer be installed through the base, but the mounting plate and the support rod can be installed on the inclined and straight surfaces. When the device needs to be used in multiple splices, it is only necessary to turn the cross rod out of the cross rod groove through the turning shaft, Make the cross bar and the cross bar groove perpendicular to each other. At this time, connect another support bar with the cross bar. The mutual connection of multiple support bars can further improve the stability of the device, and also make the connection between the devices closer. When in use, it is only necessary to install the water pipe at the volute, which is the use method of the high lift cutting submersible sewage pump.

（仅供参考）