水泵采购网

进口高压氟塑料磁力泵美国阿卡迪亚品牌

进口高压氟塑料磁力泵Product Description:

The pump cover includes a bottom plate, and the upper end of the bottom plate is successively fixed with a pump body, a suspension assembly, a three section coupling housing and a motor from left to right; The right end of the pump body is fixed with a pump cover through bolts, the right end of the pump cover is fixed with a bearing suspension through bolts, the pump cover is a skeleton through metal parts, the outside of the skeleton is molded by fluoroplastic, the inside of the pump cover is provided with a three in and one out guide hole, the guide hole is provided with an inclined guide groove, and an aluminum vibration detection ring is arranged between the bearing suspension and the pump cover and at the outer ring of the outer magnetic rotor assembly. The whole pump cover takes metal parts as the framework, and the framework is wrapped with Fluoroplastic molding; The pump cover is designed as a diversion hole with three inlets and one outlet. The diversion hole is equipped with an inclined guide groove. The guide groove is designed into a liquid flow angle that meets the requirements of working conditions according to different impeller outer diameters, so that the liquid can be quickly circulated without retention.

进口高压氟塑料磁力泵characteristic:

Magnetic drive pump (referred to as magnetic pump for short) applies the working principle of permanent magnet coupling to centrifugal pump. It has the characteristics of reasonable design, advanced technology, full sealing, no leakage, corrosion resistance and so on. Magnetic pump is composed of pump, magnetic driver and motor; The magnetic pump belongs to a branch of the water pump field. The magnetic pump is a new product that applies the working principle of permanent magnet coupling to the centrifugal pump. When the motor drives the external magnetic rotor to rotate, the magnetic field can penetrate the air gap and non-magnetic substances, drive the internal magnetic rotor connected with the impeller to rotate synchronously, realize the non-contact transmission of power, and convert the dynamic seal into static seal. As the pump shaft and internal magnetic rotor are The isolation sleeve is completely closed, thus completely solving the problem of "running, emitting, dripping and leaking", and eliminating the potential safety hazard of flammable, explosive, toxic and harmful media leaking through the pump seal in the oil refining and chemical industry.

进口高压氟塑料磁力泵Principle:

The right end of the inner side of the pump cover is fixed with an isolation sleeve assembly through bolts, the right end of the bearing suspension is fixed with a bearing front gland through bolts, the rear pump shaft is set in the bearing front gland, the left end of the rear pump shaft is fixed with an external magnetic rotor assembly through an external magnetic rotor pressing plate, the right end of the rear pump shaft is fixed with a diaphragm coupling, the right end of the diaphragm coupling is fixed with a motor, and three coupling shells are set outside the diaphragm coupling, The outer lower end of the bearing suspension is connected to the base plate through the suspension assembly.

（仅供参考）