水泵采购网

进口高压泵美国阿卡迪亚品牌

进口高压泵Product Description:

The utility model comprises a pump shaft, a high-pressure pump body and an energy recovery turbine assembly connected in series with the pump shaft; The high-pressure pump body comprises a suction section, a middle section and a discharge section which are fixedly connected in turn; The discharge section is bolted to the sealing box body, and the sealing box body is bolted to the bearing box body at the non drive end; The energy recovery turbine assembly comprises an energy recovery turbine box body and an energy recovery turbine impeller sleeved on the pump shaft; One end of the energy recovery turbine case is screwed to the suction section, and the other end is screwed to the drive end bearing case. Thus, through the coaxial design of the high-pressure pump body and the energy recovery turbine assembly, the waste brine with high pressure energy can be reused to the energy recovery turbine assembly to realize the conversion of pressure energy to mechanical energy. The energy consumption of the motor is greatly reduced, with compact structure, easy disassembly and maintenance.

进口高压泵characteristic:

Reverse osmosis seawater desalination technology (SWRO) uses the permeability characteristics of semi permeable membrane to pressurize seawater, so that water molecules overcome resistance and pass through the semi permeable membrane, so as to achieve the purpose of separating fresh water from seawater. In addition to being built on land, it is also widely used in vehicles, ships, offshore oil rigs, islands, fields, etc., which requires that the high-pressure pump and energy recovery turbine cover a small area, have a small volume, and are easy to maintain.

进口高压泵Principle:

The motor drives the coaxial high-pressure pump body and energy recovery turbine. Seawater enters the SWRO device at a pressure of 5.8 ~ 8.0MPa under the action of impeller 5 after passing through the raw water pump and filtration system through the booster pump, and the filtered fresh water is output through the finished product pump; The waste concentrated brine enters the energy recovery turbine assembly at a pressure of 5.5 ~ 6.0MPa and drives its hydraulic turbine impeller 14 to rotate. Since the high-pressure pump is coaxial with the energy recovery turbine, the waste concentrated brine assists the motor to drive the rotation of the pump shaft 10, thereby reducing the burden on the motor and realizing the recovery and utilization of energy. The waste concentrated brine after energy recovery is discharged to the evacuation channel.

（仅供参考）