水泵采购网

进口高效离心风机美国阿卡迪亚品牌

进口高效离心风机Product Description:

The impeller comprises a mounting plate, the top of which is fixedly provided with a support rod, and the top of which is fixedly provided with a fixing ring. The impeller of the high-efficiency centrifugal fan pushes the inserting barrels at both ends of the blade body into the slots through the spring return force, so that both ends of the blade body are respectively fixed on the mounting plate and the fixed ring, and are clamped on the outside of the mounting plate and the fixed ring through the clamp block. The clamp block is further fixed on the mounting plate and the fixed ring by using the fixing effect of the first fixing bolt, so as to realize the fixed installation of the blade body. When it is necessary to disassemble the blade body separately, First remove the first fixing bolt, and then move the upper and lower clamping blocks to move towards each other, so that the inserting barrel slides on the outside of the blade body, so that the inserting barrel can be taken out of the slot, and then the blade body can be taken out horizontally, so as to achieve the purpose of convenient replacement.

进口高效离心风机characteristic:

The inner part of the slot is fixedly installed with an inserting barrel, the inner side of the inserting barrel is movably installed with a blade body, the inner part of the inserting barrel is fixedly installed with a spring, the outer side of the inserting barrel is fixedly installed with a clamping block, the opposite side of the clamping block is threaded with a first fixing bolt, the top of the mounting plate is fixedly installed with a shaft sleeve, the top of the shaft sleeve is provided with a shaft hole, the outer side of the shaft hole is connected with a limit hole on the shaft sleeve, and the outer side of the blade body is fixedly connected with a reinforcing rod, One end of the reinforcing rod away from the blade body is fixedly connected with a connecting piece, and the top of the connecting piece is threaded with a second fixing bolt.

Principle:

进口高效离心风机 

Through the setting of the support rod, the installation plate and the fixed ring are connected as a whole to prevent the installation plate and the fixed ring from driving the inserting cylinder to move in the opposite direction. The installation is carried out through the shaft sleeve on the installation plate with the motor main shaft. During installation, the motor main shaft passes through the shaft hole and is inserted with a limit block suitable for the size of the limit hole to prevent relative rotation, so that the motor main shaft can drive the whole impeller to rotate normally, Through the setting of the second fixing bolt and connecting piece, the reinforcing rod is fixedly connected above the mounting plate to strengthen the fixing effect between the mounting plate and the blade body, so that the rotation of the entire impeller is more stable, achieving the purpose of good stability. It solves the problem that the existing fan impellers are all welded together, and the blades cannot be removed and replaced separately. If a blade on the impeller is seriously worn or broken during the operation of the fan, The performance of the whole fan will be degraded. This problem can only be solved by replacing the whole impeller, resulting in the waste of most good blades.

（仅供参考）