水泵采购网

进口高温蒸汽两相流量计美国阿卡迪亚品牌

进口高温蒸汽两相流量计Product Description:

Including vortex flowmeter and temperature sensor; The vortex flowmeter consists of a measuring pipe a and a meter head. The meter head is equipped with an operation control component. The measuring pipe a is equipped with a cylinder a and a measuring probe a. the measuring pipe a is equipped with a measuring pipe B. the measuring pipe B is equipped with a cylinder B and a measuring probe B. the temperature sensor is used to measure the ambient temperature. The meter head and the measuring pipe a are connected through a connecting pipe made of thermal insulation material. The connecting pipe is equipped with a heat conducting liquid. One side of the connecting pipe is equipped with a pipe, One side of the pipe is connected with the inside of the connecting pipe, the pipe is provided with a piston, one side of the piston is connected with the electric telescopic rod, and the electric telescopic rod is connected with the operation control unit. The steam two-phase flowmeter can automatically change the range according to different flows, greatly saving costs and improving work efficiency. At the same time, the meter can always be at the appropriate working temperature, with good measurement stability.

进口高温蒸汽两相流量计:

Vortex flowmeter is one of the commonly used flowmeters for measuring steam flow. Its basic principle is Karman vortex principle, that is, the vortex separation frequency is proportional to the flow velocity. The specific application is as follows: a column approximately isosceles triangle is inserted into the measuring pipe, the axis of the column is perpendicular to the flow direction of the measured medium, and the bottom faces the fluid. When the measured medium flows through the column, vortices are generated alternately on both sides of the column, and the vortices are continuously generated and separated, forming two rows of staggered vortices at the downstream of the column. The frequency of vortex separation is directly proportional to the velocity of the medium at the column side.

进口高温蒸汽两相流量计Principle:

When the ambient temperature is high, pull out the piston, and the heat transfer fluid flows to the pipe, so that the heat transfer fluid does not contact with the meter head, and an approximately vacuum thermal insulation layer is formed between the heat transfer fluid and the meter head. The meter head is connected with the connecting pipe made of thermal insulation material, so it is very difficult for the heat on the measuring pipe to be transmitted to the meter head. When the ambient temperature is high and low, push out the piston to make the heat transfer oil contact with the meter head, In this way, the heat on the pipe can be transmitted to the inner meter, so that the meter is always at a suitable working temperature.

(仅供参考）