水泵采购网

进口防腐蚀螺杆泵美国阿卡迪亚品牌

进口防腐蚀螺杆泵Product Description:

In the anti-corrosion field of screw pump, aiming at the problem that the screw pump will be corroded by external factors such as water and humid air, the following schemes are proposed, including the protective box. The outer wall of the right top box of the protective box is welded with a motor base, the top shell of the motor base is connected with a driving motor through bolts, and the output shaft of the driving motor is fixedly connected with the first rotating shaft, The outer ring at the left end of the first rotating shaft is rotationally sleeved in the inner ring of the left top box of the protective box, the front shell of the first rotating shaft is sliding connected with a fixed rod, the bottom end of the fixed rod is fixedly connected with a heating plate, and the outer wall of the heating plate is sliding sleeved with an isolating plate. The design is novel, which is convenient for sealing and storing the screw pump. During the storage process, the water inside the screw pump is dried, so that there is no water inside the screw pump, which can protect the screw pump from corrosion and is suitable for market promotion.

进口防腐蚀螺杆泵characteristic:

Screw pump, also known as "screw pump" and "Archimedes screw pump". A pump that uses the rotation of spiral blades to make the water spirally rise along the axial direction. It is composed of shaft, spiral blade and shell. When pumping water, place the pump in the water obliquely so that the inclination of the main shaft of the pump is less than that of the spiral blade, and the lower end of the spiral blade is in contact with the water. When the prime mover drives the screw pump shaft to rotate through the speed change device, water enters the blade and rises along the spiral channel until it flows out. The utility model has the advantages of simple structure, easy manufacture, large flow, small head loss, high efficiency, convenient maintenance and repair, but the head is low and the speed is low, so a speed change device is required. It is mainly used for irrigation, drainage, sewage and sludge lifting, etc

进口防腐蚀螺杆泵Principle:

One end of the fixed rod close to the first rotating shaft is fixedly connected with the limit block, the outer ring of the limit block is sliding sleeved in the inner ring of the limit groove, the middle part of the isolation plate is provided with an opening, the front inner ring and the back inner ring of the opening are both provided with a sliding groove, the front shell and the back shell of the heating plate are both fixedly connected with a sliding block, the outer ring of the sliding block is sliding sleeved in the inner ring of the sliding groove, and the outer rings at the left end of the first rotating shaft and the second rotating shaft are both fixedly sleeved with a belt pulley, The outer ring of the pulley is sleeved with a belt.

（仅供参考）