水泵采购网

进口多功能疏水阀美国阿卡迪亚品牌

进口多功能疏水阀Product description:

The utility model relates to the technical field of valves, which aims to solve the complicated operation problems of regulating the cut-off state and bypass state of steam traps. The two ends of the valve body are provided with water inlet and water outlet, the valve body is provided with an inner cavity, and the valve body is provided with a dividing part, which divides the inner cavity of the valve body into an upper cavity and a lower cavity, the dividing part is provided with a first through hole and a second through hole, the first through hole and the second through hole are arranged symmetrically with reference to the center of the valve body, The first through-hole is connected with the water inlet, the second through-hole is connected with the water outlet, the upper cavity body and the lower cavity body are connected through the first through-hole and the second through-hole, the dividing part is also provided with a detection hole, and the channel of the detection hole is led out from the side wall of the valve body.

进口多功能疏水阀characteristic:

Water valve is the abbreviation of steam trap. Its function is to automatically remove steam condensate, air and other non condensable gases from heating equipment or steam pipelines without leaking steam. As the steam trap has the function of blocking steam and draining water, it can make the steam heating equipment supply heat evenly, and make full use of the steam latent heat to prevent water hammer in the steam pipeline.

进口多功能疏水阀Principle:

The steam drain valve seat of the water valve is arranged in the upper chamber of the valve body. As shown in Figures 4 and 5, the bottom end of the valve seat is integrally formed with a connecting rod. The connecting rod is a long straight cylinder, and the valve seat is a cylinder with an opening at the top. The connecting rod is coaxial with the valve seat. One end of the connecting rod is connected with the valve seat, and the other end of the connecting rod runs through the partition of the valve body and is connected with the adjusting disc located in the lower chamber, as shown in Figure 6, The end of the connecting rod is provided with a check nut, the connecting rod is threaded with the check nut, and the check nut can hold the adjusting disc against the valve body. It is used to automatically remove non condensable gases such as steam condensate and air from heating equipment or steam pipes without leaking steam. As the steam trap has the function of blocking steam and draining water, it can make the steam heating equipment supply heat evenly, and make full use of the steam latent heat to prevent water hammer in the steam pipeline.

（仅供参考）