水泵采购网

进口高效双吸离心泵美国阿卡迪亚品牌

进口高效双吸离心泵Product Description:

The double suction pump comprises a double suction pump main body, the middle part of the double suction pump main body is provided with a blade, the middle part of the blade is penetrated by a transmission shaft, one end of the transmission shaft extends to the outside of the double suction pump main body, and the end of the transmission shaft is connected with the motor. The inner cavity of the cylinder with the middle part of the blade integrally connected is movably sleeved with a transmission shaft, and the surface of the transmission shaft in the cylinder is provided with several groups of transmission sheets with one line uniformly distributed, The drive plate is located in a sector plate-shaped chute arranged on the inner wall of the cylinder. A rectangular detent groove is arranged on a plane inner wall of the chute. The inner cavity of the detent groove is provided with a pressure device and a spring. By changing the direct connection between the blade and the transmission shaft into a connection mode of several spring buffers, the service life of the double suction centrifugal pump will be shortened to avoid the excessive transmission between the blade and the transmission shaft.

进口高效双吸离心泵characteristic:

The double suction centrifugal pump is used to transport clean water or other liquids with physical and chemical properties similar to water. According to the needs of users, it can be used to transport muddy water or various corrosive liquids by changing the pump structure and material. This series of pumps are suitable for factories, mines, urban water supply and drainage, power stations, agricultural drainage and irrigation and various water conservancy projects.

进口高效双吸离心泵Principle:

The pressure device includes a cuboid shaped roller, a support ear and a cuboid shaped telescopic column. One end of the telescopic column extends into the detent slot, and the telescopic column contacts with the spring. Two plate-shaped support ears are fixedly connected to the side of the end of the other end of the telescopic column, and a rotating shaft is fixedly connected between the two support ears. The rotating shaft is movably sleeved with a roller, and one side of the roller is in contact with the transmission plate. The pressure device acts as a buffer, When the drive plate starts to rotate around the axis of the drive shaft, the drive plate starts to push the pressure device. Specifically, the drive plate pushes the drum. Through the transmission of the drum, the support ear presses the telescopic column into the detent groove, and the telescopic column presses the spring. The spring always resists the pressure from the telescopic column during the contraction process, and finally the pressure device fully enters the detent groove, However, when the drive plate pushes the pressure device, it is always affected by the reaction of the spring. Finally, one end of the drive plate butts against the side wall of the detent groove on the chute, and several drive plates move together to promote the rotation of the cylinder. Because of the existence of several springs, the process of the drive plate pushing the cylinder becomes relaxed, that is, the blade will not be directly pushed by the strong thrust in the process of the drive shaft driving the blade to rotate, To avoid accidental damage of the blade and the transmission shaft, the function of the drum realizes the rolling connection between the drum and the transmission plate. Since the transmission plate rotates around the axis of the transmission shaft, considering the dislocation movement between the transmission plate and the pressure device, this ensures the smooth change of the relative position between the telescopic column and the detent slot.

（仅供参考）