水泵采购网

进口干式污水泵哪家品牌好

进口干式污水泵Product description:

The utility model includes a circulating chamber, the lower surface of the circulating chamber is equipped with a base, the front and rear surfaces of the base are equipped with water inlets, the inner wall of the base is near the upper end of the base is equipped with a filter screen, the left surface of the circulating chamber is equipped with a drain hole, the upper surface of the circulating chamber is equipped with a shell, the right surface of the shell is near the upper end is equipped with a water inlet, and the left surface of the shell is equipped with a bump; Several groups of holes are set through the front surface of the filter screen, which can effectively filter out solid impurities such as sand and gravel in the sewage. At the same time, a blade is set on the fan blade, which can effectively cut up the fiber impurities in the sewage, prevent the impurities from blocking the equipment and affecting the work, effectively prevent the sewage from polluting the staff, and effectively prevent the equipment from being damaged due to excessive temperature during the work.

进口干式污水泵characteristic:

The rear end surface is provided with water inlet, the inner wall of the base is installed with a filter screen near the upper end, the left end surface of the circulation chamber is provided with a drainage hole, the upper end surface of the circulation chamber is installed with a shell, the right end surface of the shell is installed with a water inlet near the upper end, the left end surface of the shell is installed with a bump, the inside of the bump is installed with a telescopic rod, the right end surface of the telescopic rod is provided with a chute, and the upper end surface of the shell is provided with a motor housing, The upper surface of the motor shell is equipped with a plug hole near the middle position, the motor shell is equipped with several groups of external cooling holes, the inner wall of the shell is equipped with a motor bracket near the middle position, the motor bracket is installed with a motor, the lower surface of the motor is installed with a shaft, the lower end of the shaft is installed with several groups of fan blades, and the fan blades are installed with blades.

进口干式污水泵Principle:

The water filling port fills the cavity between the housing and the motor with water, and then through the cooperation of several groups of external heat dissipation holes and several groups of heat dissipation holes on the upper surface of the housing, it can play a very good heat dissipation effect on the equipment and prevent the equipment from being damaged due to excessive temperature during the working process. The left wall inside the bump is equipped with a slider, and the expansion rod is movably installed inside the bump through the cooperation of the chute and the slider, The staff can put the equipment into the sewage pit through the telescopic rod without contaminating the staff. The motor bracket can well fix the motor inside the housing. After starting the power supply, the motor will drive the fan blades to rotate so that the sewage flows into the circulating chamber from the water inlet, and then flows out from the drainage hole. There are several groups of holes running through the front surface of the filter screen, which can effectively filter out the sand and gravel and other solid impurities in the sewage

（仅供参考）