水泵采购网

进口分体式排污潜水泵哪家品牌好

进口分体式排污潜水泵Product Description:

The utility model relates to the field of sewage submersible pumps. A split sewage submersible pump comprises an end cover, a liquid discharge pipe, a liquid discharge cover and a base. A rotor seat is installed on one side of the outer wall of the end cover, a liquid discharge pipe is welded on the top of the outer wall of the rotor seat, a liquid discharge cover is installed on the top of the liquid discharge pipe, an observation window is installed on one side of the outer wall of the liquid discharge cover, a triangular support plate is installed on the outer wall of the rotor seat, a connecting bolt is threaded on the other side of the outer wall of the rotor seat, and a base is threaded on the other side of the connecting bolt, The bottom of the outer wall surface of the substrate is provided with a mounting threaded hole, the top of the outer wall surface of the substrate is provided with an exhaust valve, one side of the outer wall surface of the exhaust valve is provided with a substrate top cover, the other side of the outer wall surface of the substrate is provided with a first liquid discharge port, and the bottom of the first liquid discharge port is provided with an inspection port. The utility model solves the problems that most of the traditional sewage submersible pumps are integral pumps, which are difficult to disassemble and clean, and most of them are single rod pumps. The utility model has the advantages of sectional installation and double rod drive.

进口分体式排污潜水泵characteristic:

Submersible pump is an important equipment for deep well water extraction; When in use, the whole unit dives into the water to extract the groundwater to the surface, which is used for domestic water, mine rescue, industrial cooling, farmland irrigation, sea water lifting, ship load adjustment, and fountain landscape; The hot water submersible pump is used for bathing in hot springs. It can also be used to extract groundwater from deep wells. It can also be used in water extraction projects such as rivers, reservoirs and canals; It is mainly used for farmland irrigation and human and livestock water in alpine areas. It can also be used for central air conditioning cooling, heat pump units, cold pump units, urban, factory, railway, mine and construction site drainage; The general flow can reach 650m 3/ h. The lift can reach 10 ? 550m; Before use, you must read the manual first, and do not make mistakes. If you do not use it for a long time, you must turn the impeller before use, otherwise you will burn the bag because you do not use it for a long time; Before starting the pump, the suction pipe and pump must be filled with liquid; After the pump is started, the impeller rotates at a high speed, and the liquid in it rotates with the blades. Under the action of centrifugal force, it flies away from the impeller and shoots out. The speed of the emitted liquid in the diffusion chamber of the pump shell gradually slows down, the pressure gradually increases, and then flows out of the pump outlet and discharge pipe.

进口分体式排污潜水泵Principle:

End cover, end cover bolt, main shaft seat, rotor cavity, liquid discharge pipe, liquid discharge cavity cover bolt, observation window, connecting bolt, base, base cavity, stator seat, rotor seat, installation threaded hole, exhaust valve, base cover, first liquid discharge port base, sealing ring seal cover, second liquid discharge port, triangular support plate, inspection port, infusion pipe, infusion end cover, base, and base threaded hole.

（仅供参考）