水泵采购网

进口防堵塞污水泵哪家品牌好

进口防堵塞污水泵Product description:

It includes a pump body, a motor and a filter seat. The upper end of the pump body is connected with the lower end of the motor with an intermediate end cover, and the pump body is installed with an impeller and a seal ring. The filter seat is installed on the water inlet side of the pump body through bolts, and a filter screen is installed between the inner walls of the filter seat through screws. One side of the filter screen is provided with a water inlet inside the filter seat, and both sides of the water inlet are installed with drive gears through micro drive motors, A driven gear is meshed between the driving gears on both sides, which is installed on one side of the filter screen through a rotating shaft, and a mixing blade is installed in the middle of the driven gear. Compared with the prior art, the utility model not only improves the anti clogging ability of the sewage pump, but also facilitates the installation and removal of the filter seat, and is conducive to the daily maintenance and replacement of the filter seat.

进口防堵塞污水泵characteristic:

The outer walls on both sides of the filter seat are welded with support plates. The support plates are used to facilitate the removal and installation of the filter seat. The support plates are connected with the outer wall of the inlet end of the pump body through bolts. One side of the support plate is provided with a seal ring on the outer wall of the filter seat. A filter screen is installed between the inner walls of the filter seat through screws. The filter screen is used to filter impurities to prevent blocking the inside of the pump body, One side of the filter screen is provided with a water inlet inside the filter seat. Both sides of the water inlet are equipped with a driving gear (the driving gear is a bevel gear) through a miniature driving motor. The driving gear is used to drive the driven gear in the middle to rotate. Both sides of the water inlet are provided with chambers inside the filter seat. The driving gear is placed in the chamber. The driving motor is installed on the outer wall of the chamber through screws, A driven gear (also a bevel gear) is meshed between the drive gears on both sides. The driven gear is used to drive the mixing blade inside it to rotate synchronously. The driven gear is installed on one side of the filter screen through the rotating shaft, and a mixing blade is installed in the middle of the driven gear. The mixing blade is used to crush impurities that may cause blockage.

进口防堵塞污水泵Principle:

Insert the filter screen into the filter seat from the right end as shown in the figure to make it offset with the right end of the rotating shaft, and then fix the filter screen with the inner wall of the filter seat with screws. Then insert one end of the filter seat with the sealing ring into the water inlet end of the pump body until the support plate contacts the outer wall of the water inlet end of the pump body, and then fix the support plate with the outer wall of the water inlet end of the pump body with bolts. Later, when the sewage pump is used, Start the motor to make it drive the sewage pump to start working. At the same time, start the drive motor to make the drive motors on both sides drive the drive gears on both sides to rotate, so as to drive the driven gear to rotate under the driving effect of the two drive gears. With the rotation of the driven gear, the mixing blade rotates synchronously, while the rotating shaft rotates in situ inside the side wall of the filter screen.

（仅供参考）