水泵采购网

进口单级单吸离心式纸浆泵哪家品牌好

进口单级单吸离心式纸浆泵Product Description: The utility model relates to the technical field of pulp pump, including a pump body, a front pump cover is installed in the middle of the left side of the pump body throu bolts, a handhole cover is installed in the middle of the upper surface of the front pump cover, a front lining is connected to the left inner wall of the pump body throu bolts, a rear lining corresponding to the front lining is installed on the rit inner wall of the pump body, an impeller is installed inside the pump body, and a packing pump cover is installed on the rit side of the pump body. Single stage single suction centrifugal pulp pump, the impeller adopts a three blade open structure, the impeller is lit in weit, and the pulp is driven out throu the continuous rotation of the impeller. Therefore, 进口单级单吸离心式纸浆泵it has the possibility of no blockage, the overflow channel is enlarged, and it is suitable for the transportation of fine pulp containing a certain amount of gas medium. It is widely used in the transportation of fine pulp with a concentration of ≤ 6% in papermaking, pulp, sugar and starch enterprises, as well as the transportation of wear-free medium in other industries, It can effectively reduce power consumption for users. characteristic: The single-stage single suction centrifugal pulp pump mainly includes the pump body. The front side of the pump body is connected with the front cover, and the rear side of the pump body is connected with the connecting frame. A rear cover is set between the connecting frame and the pump body, and the rear side of the connecting frame is connected with the suspension. The same main shaft is penetrated in the rear cover, the connecting frame and the suspension. One end of the main shaft is connected with the impeller, the impeller is set in the pump body, and the other end of the main shaft is connected with the motor. Due to structural defects, the pulp pump of this structure, 进口单级单吸离心式纸浆泵The pulp cannot be knocked out in the pump body and is completely clamped in the pump body, so it cannot be output, resulting in blockage and stopping the pump. Principle: The single-stage single suction centrifugal pulp pump is set as a single-stage single suction cantilever rear door structure. Without disassembling the pump body, the impeller, connecting frame, suspension and other components can be disassembled and installed as a "pulling component", and the pipeline does not need to be disassembled during maintenance. The shaft seal mainly includes single end mechanical seal with filler, single end mechanical seal without cooling water, and filler seal, It can be selected according to the user's needs and actual use conditions. The gap between the front lining and the impeller can be adjusted outside throu the adjusting bolt on the pump body, which can maintain a constant gap between the impeller and the front lining, so as to improve the service efficiency of the pump. The impeller end is fixed with impeller bolt and stop gasket, which can also well prevent the falling off of impeller bolt due to the reverse rotation of the impeller when the pump is shut down. The structure is reliable and ensure the safe operation of the pump, Long service life.

（仅供参考）